WELCOME to KRIZ SENSORS world leaders in High Temperature Inductive Proximity Sensor TechnologyKRIZ SENSORS Ltd

Shop section


E-News
Sign up for our monthly e-news letter, and receive all the latest product news and e-shop special offers.
Enter your e-mail...
 
 

This catalog is reserved for registered customers only. Please contact us to register.

HT Inductive Proximity Sensor.- IN30-50HT-230EXT-T

Online Catalogue | DATA SHEETS | HT SERIES DATA SHEETS | M50 SERIES DATA SHEETS |  HT Inductive Proximity Sensor.- IN30-50HT-230EXT-T

KRIZ SENSORS DATA SHEET

SENSOR SPECIFICATION EN60947-5-2  
Max Ambient Temperature-25../..+230°C..Kriz M50 HT Sensor..
Temp Converter   °Fahrenheit    °Centigrade
 
Sensor SizeM50
Nominal Sensing Distance (SN)30mm   EN-50010
Amplifier   Tech Note 1*External (See Options)
InstallationNon-Flush
Max Switching Frequency100Hz@230°C
Repeatability< 3% of SN
Hysteresis3....15% of SN
Target LEDOn Ext Amp
Connecting cable   Tech Note 2*Teflon / PUR
Connector OptionYes (See table below)
Environmental ProtectionIP66
Housing Material1.4305 St Stl 
Note,
All kriz sensor products that operate above 180C are designated with 'EXT' in the product syntax and require an external amplifier to function. There are two types of external amplifier available and are displayed below as Option 1 and 2 respectively. Whilst the 'EXT' amplifiers perform similar functions they have been designed to satisfy differing Electrical, Mechanical and Environmental criteria found in a wide range engineering applications.
OPTION 1- 'M' Series In-line External Amp  
    PRODUCT FEATURES
  • Compact design housed in M12 body
  • Through hole or bracket mounting
  • Yellow target LED
  • Stainless steel body
  • Factory calibrated
  • Reverse polarity protection
  • Output overload protection
  • Output short circuit protection
  • Environmental Protection IP66
SPECIFICATIONS...DIMENSIONS...
Supply Voltage Range10../..30 VDC
Rated Supply Voltage24 VDC
No Load (I)≤ 3mA
OutputN.O. PNP or NPN
Max (I) Output120mA@24VDC
Voltage Drop (Output)less than 1.8VDC
Max Ambient Temp-25../..+70°C
CONNECTION...
BLUE0V
BLACKOutput
BROWNSupply +VDC
  
OPTION 2- 'SM' Series External Amp  
 
    PRODUCT FEATURES
  • Compact design W22,5 x H75 x D98mm
  • Standard (35mm) DIN rail mounting
  • Target LED on fascia
  • High Impact ABS enclosure
  • Factory calibrated
  • Recessed terminals
  • Reverse polarity protection
  • Output overload protection
  • Output short circuit protection
  • Environmental Protection IP54
SPECIFICATIONS... CONNECTION DETAIL...
Supply Voltage Range10../..30 VDCTERMINAL 1,3,5,10,11,12,N.C.
Rated Supply Voltage24 VDCTerminal 4Sensor (Brown)
No Load (I)≤ 3mATerminal 5Sensor (Black)
OutputN.O. PNP or NPN Terminal 6Sensor (Blue)
Max (I) Output180mA@24VDCTerminal 7Supply 0V
Voltage Drop (Output)less than 1.8VDCTerminal 8Output
Max Ambient Temp-25../..+70°CTerminal 9Supply +
   
CABLE / CONNECTOR SYSTEM...  
The factory default option for all kriz Sensor products is for the connecting cable to be direct wired to the sensor or together with the amplifier. To enhance application flexibility of the product range the sensors (M18 and larger) can be supplied with the LEMO type connector system, which is Industry accepted with approvals in many Engineering fields. The table below illustrates how the LEMO connector system is integrated into the product range. It should be noted that we are not limited to a particular connector system and whilst the LEMO type is common in the EU countries we can fit a connector system designated by the customer, therefore allowing the device to integrate directly into your application.

Tech Note-1*- Any sensor head with EXT in the product syntax can be interfaced directly to either the 'M' or 'SM' series amplifiers and are fully interchangeable even when in service with no adjustments required.
 
    Format using 'M'-Series EXT amplifier...
  The amplifier is supplied with customer specified cable length fitted with LEMO type connector, which is hard wired to the 'M' series amplifier. The amplifier is also pre-wired with 2Mtrs PUR cable for connection to power supply and output interfacing etc.
Format using 'SM'-Series EXT amplifier...
  The amplifier is supplied with a separate connecting lead of customer specified length fitted with LEMO type connector, the plain cable end is prepared for connection to the screw terminals on the 'SM' series amplifier. 

CABLE SPECIFICATIONS... 
Tech Note 2*-The PTFE cable used on our HT 'EXT' sensor product range exhibits excellent resistance properties to a wide range of chemicals, please check with our technical sales office for further information.
MaterialPTFE
Construction2 x 0.34mm2 + Braid (Cu)
Ambient Temp Range (Flexible laying)-55../..+250°C
Ambient Temp Range (Fixed laying)-90../..+250°C
External DiameterNom 3.8mm
ColourWhite VDE-D293 01/90
Minimum Bend Radius20mm @ 250°C

DIMENSIONS...  

 

link

To purchase this sensor please click the Image

Online Catalogue | DATA SHEETS | HT SERIES DATA SHEETS | M50 SERIES DATA SHEETS |  HT Inductive Proximity Sensor.- IN30-50HT-230EXT-T

This catalog is reserved for registered customers only. Please contact us to register.